I have an
ac infinity 6” set up, I have hps lighting so I have the fan and filter outside the tent drawing off the light housing.
I have a 250 cfm 6” can fan blowing in, it’s also outside the tent with a high flow dust and bug filter.
In hind sight 2 of the infinity 4” would have been plenty one controller works for 2 fans, in and out
The t4 has controller, the s4 is manual but plugs into t4 controller
I do not use all the automatic features of the
ac infinity t6 I went through and turned them all off. The alarm and auto features were tricky and will try to suck the tent flat, personal experience. I use it manually and its only ever set on 3. I just like the lcd and temp/humid sensor. Also all the vents and ports are closed except the intake and exhaust. My tent is only 2x4 so you may need more air flow that that.
After everything was hooked up I plugged the can fan in and puffed up the tent, then turned up the infinity till there started to be slack. Stop there cause it’s already going to have negative pressure, it will just take a while to depressurize the whole tent tent if the balance is right. If the balance is To negative it will stretch the tent material.
I try to plant my beans right into soil, and water with a spray bottle just enough to wet around the seed 1/2 “ down or so. I keep them in a warm area, top of fridge, closish to fire, seedling heat mat etc, and watch till the soil cracks on top. Then it goes into the veg tent, right under the lights. And pops out of the dirt into the “sun”.
Everyone’s got a way that works for them :) have fun, looks good.