Irishguy83
- 387
- 63
Ok so I'm still safe if my RH hits 60% during night
Aqua Man
- 26,480
- 638
There is no hard set rule to safe. Bit yeah with decent air circulation and under 60% I would not have a worry.
Irishguy83
- 387
- 63
That's the highest I've seen but like just now I raised my over all temp and intake took care of the rest I'm still researching VPD and ppm to ph
Aqua Man
- 26,480
- 638
Did you see my thread on VPD?
Irishguy83
- 387
- 63
So I checked on her after that res change and had to balance ph from 7.03 back down to 5.76.... height at 14" so 2 inch one day that's the first... 22" from lights @ 37.2k lux.... i took pics as I do with any change here they are...
Irishguy83
- 387
- 63
Checked her at 24 hour Mark ppm from 309 to 171.... had to drop ph from 6.38 to 5.78
Shes 16" today @ 38k lux I'll put some pics up when I get done with my day....
Shes 16" today @ 38k lux I'll put some pics up when I get done with my day....
Aqua Man
- 26,480
- 638
Up ppm to 450 she is a pig lol. The ph is a little high but see after adjusting nutrients
Irishguy83
- 387
- 63
How do I adjust my ppm during the week?
Aqua Man
- 26,480
- 638
What are you using for ferts again? How much water is she drinking also
Irishguy83
- 387
- 63
I'm using emerald harvest 3 part grow micro bloom.... she drinks about a half inch to an inch of water within 24hours as of now
Aqua Man
- 26,480
- 638
Ok let me look that up fast
Irishguy83
- 387
- 63
If I dont answer I'm busy but I'm checking this when I can
Aqua Man
- 26,480
- 638
What ratio are you using right now?
Irishguy83
- 387
- 63
Was at 25% at the early veg dosing for emerald harvest.... then yesterday I did my best to adjust it to 30% that's what brought me to 309
Aqua Man
- 26,480
- 638
Yes but what ratio of grow,micro bloom?
Irishguy83
- 387
- 63
Grow 8ml, micro 5ml, bloom 2 or 3 ml
Irishguy83
- 387
- 63
And I have silica, great white and dyna-zyme
Aqua Man
- 26,480
- 638
Personally I don't like the feeding chart, if I was using these I would go equal parts about now and use that from after the second week until after stretch then shift more towards bloom. How long until you plant to flip to flower?
I would mix 8ml of each to 1 gal of water and add a bit at a time until you get the ppm you desire. Then ph. You will see the ph drop from the nutrients so always ph last. If it doesn't reach the original water line just too up with water and you mix until you get back to the original waterline each day or 2 once you get the nutes dialed in. I think it's to much nitrogen in the early veg mix and not enough in the early flower. Ratios don't need to change like that. It's gimmickry.
I would mix 8ml of each to 1 gal of water and add a bit at a time until you get the ppm you desire. Then ph. You will see the ph drop from the nutrients so always ph last. If it doesn't reach the original water line just too up with water and you mix until you get back to the original waterline each day or 2 once you get the nutes dialed in. I think it's to much nitrogen in the early veg mix and not enough in the early flower. Ratios don't need to change like that. It's gimmickry.
Aqua Man
- 26,480
- 638
You only need to add silica and others at res change
Irishguy83
- 387
- 63
Ok sorry been busy today.... so add 8ml of all 3 parts into 1 gal of water then balance and use this to top off water in res.... then stir check ppm if cool balance ph? If not then balance anyways because I will be at water level and just add everyday until my target ppm which I believe we agreed for me to move to 450 ppm?
Latest posts
-
ZWho Are the Best Breeders in 2021?
- Zatoichi posted
-
Should i use a smaller light for now.- HerbalEdu posted
-
420 Promo by Herbies is already here!- Herbies_Seeds posted
-
Can someone please tell me if my plants are male or female???
- HerbalEdu posted
